A. SCI Indexed Publications

A1. Gündüz, G., S. Korkut and D. S. Korkut, "The effects of heat treatment on physical and technological properties and surface roughness of Camiyanı Black Pine (Pinus nigra Arn. subsp. pallasiana var. pallasiana) wood", Bioresource Technology, 99 (7), 2275-2280, (2008).

A2. Gündüz, G. P. Niemz and D. Aydemir, "Changes in Specific Gravity and Equilibrium Moisture Content in Heat-Treated Fir (Abies nordmanniana subsp. bornmulleriana Mattf.) Wood", Drying Technology, 26 (9), 1135-1139 (2008).

A3. Kaygın, B., G. Gündüz and D. Aydemir, "Some Physical Properties of Heat-Treated Paulownia (Paulownia elongata) Wood", Drying Technology, 27 (1), 89-93 (2009).

A4. Gündüz, G., D. Aydemir and G. Karakas, "The Effects of Thermal Treatment on the Mechanical Properties of Wild Pear (Pyrus elaeagnifolia Pall.) Wood and Changes in Physical Properties", Materials and Design, 30 (10), 4391–4395, (2009).

A5. Gündüz, G. and D. Aydemir, "Some Physical Properties of Heat-Treated Hornbeam (Carpinus betulus L.) Wood", Drying Technology, 27 (5), 714-720, (2009).

A6. Gündüz, G., Korkut, S., D. Aydemir and I. Bekar, "The Density, Compression Strength and Surface Hardness of Heat Treated Hornbeam (Carpinus betulus L.) Wood", MADERAS: Ciencia y tecnología, 11 (1): 61-70, (2009).

A7. Aytekin, A., Gündüz, G., Kaygın, B., S. Korkut and S. M. Onat, "Drying schedules calculation of Camiyani Black Pine (Pinus nigra Arn. subsp. pallasiana var. pallasiana) by computer programming", African Journal of Biotechnology, 8 (8), 1703-1712, (2009).

A8. Gündüz, G., D. Aydemir, B. Kaygın, A. Aytekin, "The Effect of Treatment Time on Dimensionally Stability, Moisture Content and Mechanical Properties of Heat Treated Anatolian Chestnut (Castanea sativa Mill.) Wood", Wood Research, 54 (2): 117-126, (2009).

A9. Kaygin, B., G. Gündüz, and D. Aydemir, "The effect of mass loss on mechanic properties of Heat Treated Paulownia (Paulownia elongata) Wood” Wood Research, 54 (2): 101-108, (2009).

A10. Saracoglu, N and G. Gündüz, “Wood Pellets—Tomorrow’s Fuel for Europe”, Energy Sources, Part A, 31 (19), 1708-1718 (2009).

A11. Gündüz, G. and D. Aydemir, "The influence of mass loss on mechanical properties of Heat Treated Black Pine Wood", Wood Research, 54 (4): 33-42, (2009).

A12. Aydemir, D. G. Gündüz and S.M. Onat, "The Impact of Heat treatment on Lap Joint Shear Strenght of Black Pine Wood", Journal of Adhesion, 86 (9): 904-912, (2010).

A13. Gündüz, G., D. Aydemir and S. Korkut, "The Effect of Heat Treatment on Some Material Properties and Color Changes of Uludag Fir (Abies bornmulleriana Mattf.) Wood", Drying Technology, 28 (2): 249-255, (2010).

A14. Tümen, I., Aydemir, D., G. Gündüz, Uner, B., H. Cetin,"Changes in the Chemical Structure of Thermally Treated Wood", BioResources, 5(3): 1936-1944, (2010).

A15. Gündüz, G., Yapici, F., Özçifci, A and H. Kalaycioglu, "The Effects of Adhesive Ratio and Pressure Time on Some Properties of Oriented Strand Board", BioResources, 6(2): 2118-2124, (2011).

A16. Gündüz, G., Aydemir, D., Onat, S. M. and Akgun, K. (2011)."The Effects of Tannin and Thermal Treatment on Physical and Mechanical Properties of Laminated Chestnut Wood Composites", BioResources, 6(2): 1543-1555, (2011).

A17. Aydemir, D. G. Gündüz, E. Altuntas, M. Ertas, H. Turgut Sahin and M. Hakki Alma, "Investigating Changing in the Chemical Constituens and Dimensional Stability of Heat-Treated Hornbeam and Uludag Fir Wood", BioResources, 6(2): 1308-1321, (2011).

A18. Kadimaliev, D., Telyatnik, V., Revin, V., Parshin, A., Allahverdi, S., Gündüz, G., Kezina, E., Asık, N,"Optimization of the Conditions Required for Chemical and Biological Modification of the Yeast Waste from Beer Manufacturing to Produce Adhesieve Compositions", BioResources, 7(2): 1984-1993, (2012).

A19. Aydemir, D. G. Gündüz and S. Özden, "The Influence of Thermal Treatment on Color Responses of Wood Materials",Color Research and Application, 37 (2) : 148-153 (2012).

A20. Gündüz, G., Yaman, B., Ozden, S., Donmez, SC., Anatomy of Wooden Core of Ottoman Composite Archery Bows, Sains Malaysiana 42(5)(2013):547–552.

A21. Deniz Aydemir , Alper Kiziltas , Yousoo Han , Douglas J. Gardner & Gokhan Gunduz (2014) Influence of Micro- and Nanonatural Fillers on Mechanical and Physical Properties of Foamed SMA Composites, Polymer-Plastics Technology and Engineering, 53:17, 1825-1831, DOI: 10.1080/03602559.2014.935406.

A22. Aydemir, D., Kiziltas, A., Gardner, D.J., Han, Y., Gunduz, G., "Morphological characterization of foamed natural filler-reinforced styrene maleic anhydride (SMA) composites", Journal of Porous Materials, (2014) 21:1059–1067, DOI 10.1007/s10934-014-9856-x.

A23. Aydemir, D., Kiziltas, A., Kiziltas, E.E., Gardner, D.J., Gunduz, G., "Heat treated wood-nylon 6 composites", Composites: Part B 68: 414-423, (2015).

A24. Aydemir, D., Kiziltas, A., Gunduz, G., Han, Y., Gardner, D.J., Natural Fillers - Filled Styrene Maleic Anhydride Copolymer Composites, Wood Research, 60 (1): 167-174 (2015).

A25. Ayhan Aytin, Süleyman Korkut, Nusret As, Öner Ünsal, Gökhan Gündüz (2015) Effect of Heat Treatment of Wild Cherry Wood on Abrasion Resistance and Withdrawal Capacity of Screws, doi:10.5552/drind.2015.1440, DRVNA INDUSTRIJA 66 (4) 297-303.

A26. Deniz Aydemir, Alper Kiziltas, Douglas J. Gardner, Yousoo Han & Gokhan Gunduz (2015) Thermal Analysis of Micro- and Nano-Lignocellulosic Reinforced Styrene Maleic Anhydride Composite Foams, International Journal of Polymer Analysis and Characterization, 20:3, 231-239, DOI: 10.1080/1023666X.2015.1012792

A27. Deniz Aydemir, Busra Civi, Mizgin Alsan, Ahmet Can, Huseyin Sivrikaya, Gokhan Gunduz, Alice Wang (2016) Mechanical, Morphological and Thermal Properties of Nano-boron Nitride Treated Wood Materials, Maderas. Ciencia y tecnología 18(1): 19 - 32.

A28. Gokhan GUNDUZ, Mehmet Ali ORAL, Mehmet AKYUZ, Deniz AYDEMİR, Barbaros YAMAN, Nejla ASIK, Ali Savas BULBUL, Surhay ALLAHVERDI (2016) Investigation on Some Physical, Morphological Properties And Raman Spectroscopy of Chestnut Blight Infected Castanea sativa Mill. Wood, CERNE, 22(1): 43-58.

A29. G. Gündüz., Saracoglu, N., D. Aydemir (2016) Characterization and Element Analysis of Wood Pellets Obtained from Low-valued Types of Wood, ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS Volume: 38 Issue: 15 Pages: 2211-2216.

A30. Deniz AYDEMIR, Gulsen UZUN, Havva GUMUŞ, Sonnur YILDIZ, Sultan GUMUŞ, Timucin BARDAK, Gokhan GUNDUZ (2016) Nanocomposites of Polypropylene/Nano Titanium Dioxide: Effect of Loading Rates of Nano Titanium Dioxide, ISSN 1392–1320, MATERIALS SCIENCE-MEDZIAGOTYRA Volume: 22 Issue: 3 Pages: 364-369.

A31. Deniz Aydemir, Gökhan Gündüz, Nejla Aşık, Alice Wang (2016) The Effects of Poly(vinyl acetate) Filled with Nano clay and Cellulose Nanofibrils on Adhesion Strength of Poplar and Scots Pine Wood, DRVNA INDUSTRIJA 67 (1) 17-24.

A32. Karakuş, K., Aydemir, D., Öztel, A., Gunduz, G., Mengeloglu, F. (2017). Nanoboron nitride-filled heat-treated wood polymer nanocomposites: Comparison of different multicriteria decision-making models to predict optimum properties of the nanocomposites. Journal of Composite Materials, Volume: 51 issue: 30, page(s): 4205-4218, Article first published online: March 20, 2017; Issue published: December 1, 2017. https://doi.org/10.1177/0021998317699984.

A33. Al, G., Aydemir, D., Kaygin, B., Ayrilmis, N. and Gunduz, G., 2018. Preparation and characterization of biopolymer nanocomposites from cellulose nanofibrils and nanoclays. Journal of Composite Materials, 52(5), pp.689-700.

A34. Gunduz, G., Erbas Kiziltas, E., Kiziltas, A., Gencer, A., Aydemir, D. and Asik, N., 2018. Production of bacterial cellulose fibers in the presence of effective microorganism. Journal of Natural Fibers, pp.1-9. Doi: 10.1080/15440478.2018.1428847

A35. Gulyaz Al, Deniz Aydemir, Nadir Ayrilmis, Bulent Kaygin, Gokhan Gunduz. 2018. The effect of nanoboron nıtride on some propertıes of biopolymer nanocomposites with cellulose nanofibrils and nanoclays. DRVNA INDUSTRIJA 69 (1) 43-48

A36. Gunduz, G., Asik, N., "Production and Characterization of Bacterial Cellulose with Different Nutrient Source and Surface-Volume Ratios ", DRVNA INDUSTRIJA, 69(1): (2018) 141-148.

A37. Sozen,E., Gunduz, "Ballistic performance of sandwich panels made of wood/plastic/metal and woven glass fiber ", Journal of Sandwich Structures and Materials, DOI: 10.1177/1099636220924755 (May 2020)

A38. Aydemir, D., Karakus, K., Gunduz, G., Mengeloglu, F., "Heat-treated wood reinforced high density polyethylene composites ", DRVNA INDUSTRIJA, 72(3): (Februar 2021) xxx.xxx.

A39. Sozen, E., Gunduz, G., Aydemir, D., Can, A., "Surface Modification of Bacterial Cellulose Films with Various Fire Retardants ", Journal of Thermal Science and Engineering Applications, DOI: 10.1115/1.4047278: (April 2021).

B. Proceedings in National and International Conferences

B1. Gündüz, G. and H. Vurdu, "The Extraction of Rhododendron ponticum L. Flowers and Determination as an Coloring Matter", 2nd International Plant Compounds Symposium, 22-24 October, Eskişehir, p63, 1996.

B2. Gündüz, G., H. Vurdu and S. Allahverdiev, "The Extraction of Rhododendron ponticum L. Flowers and Determination as an Coloring Matter", The 2nd International Symposium "Novel and Non-Conventional Plants: Prospects of Their Practical Use", 15-20 June 1997, Russia.

B3. Aytekin, A., B. Kaygın, G. Gündüz, S. Karayılmazlar, Ş. Özşahin, "Preparing Drying Schedules of Fraxinus excelsior L. by Computer Program", New and Nontraditional Plants and Prospects of Their Utilization, International Symposium, 181-183, Pushino-Moscow, 1999.

B4. Gündüz, G., H. Vurdu, B. Kaygın, A. Aytekin, "Annual Ring Properties of Pinus nigra Arnold var. pallasiana (Camiyanı Black Pine) Grown in Turkey", New and Nontraditional Plants and Prospects of Their Utilization, International Symposium, 199-201, Pushino-Moscow, 1999.

B5. Kaygın, B., A. Aytekin, G. Gündüz, R. Özen, "Hardness and Brightness Durability Properties of Opaque Paints Used In Furniture Industry", New and Nontraditional Plants and Prospects of Their Utilization, International Symposium, 205-207, Pushino-Moscow, 1999.

B6. Tümen, İ., H. Hafızoğlu ve G. Gündüz, "Anatomical Physical Properties of Wild Pear (Pyrus communis L.)", XXI IUFRO WORLD CONGRESS, Forest and Society: The Role of Research, Poster Abstracts, div5, 198-199, Malezya, 2000.

B7. Gündüz, G., H. Vurdu ve I. Tümen, "Utilization Possibilities as an Coloring Substance of Rhododendron ponticum L.", XXI IUFRO WORLD CONGRESS, Forest and Society: The Role of Research, Poster Abstracts, div5, pp245, Malaysia, 2000.

B8. Onat, M., G. Gündüz, "Behavior of Metal Plate Connected Laminated Strand Lumber Joints Under Shear Stress", Third Balkan Scientific Conference, 2-6 October, Sofia, pp: 331-336, 2001.

B9. Gündüz, G., A. Aytekin ve H. Vurdu, "Some Chemical Properties of Camiyani Black Pine (Pinus nigra Arn. var. pallasiana subsp. pallasiana)", The 5. International Symposium New an Nontraditional Plants and Prospects of Their Utilization, 483-485, Russia, 2003.

B.10 Allahverdiev, S.R., Ugodçikov G.A., Gadimov, A.G., Gündüz, G. XXI Asrın Ekolojik Problemlerinin Çözümünde Mikrobiyolojinin Rolü. Uluslararası Konferans: Mikroorganizmaların fizyolojik – biyokimyasl ve ekolojik özellikleri. Bakü, 14-16 Aralık 2005, 20-25.

B11. Allahverdiev, S. Gündüz, G. Agriculture and Biotechnology. GAP IV. Tarım Kongresi. Şanlıurfa, 21 – 23 Eylül, 2005, 2, 358 – 360.

B12. Gündüz, G., “Kestane Odununun Anatomik Özellikleri ve Kurutulması”, Kestane Konferansı: Odunu ve Meyvesi ile Ekonomideki Yeri, Zonguldak Orman Bölge Müdürlüğü, Bölüm 2, Zonguldak, 2006.

B13. Gündüz, G. and D. Aydemir, "The Effect of Heat Treatment on Water Absorption and Dimensional Stability of Anatolian Chestnut (Castanea sativa Mill.) Wood", 39th Processing of International Research Group on Wood Protection, IRG/WP 08-40407, 25-29 May 2008, İstanbul-Turkey.

B14. Gündüz, G., P. Niemz ve D. Aydemir, "Specific Gravity and Equilibrium of Moisture Content Changes in Heat Treated Fir (Abies nordmanniana subsp. bornmülleriana Mattf.) Wood", 10th International IUFRO Division-5 Wood Drying Conference, Orono, Maine, USA, 26-30 August, 2007.

B15. Aydemir, D., Gündüz, G., Tumen, I. and Cetin, H. "The Influence of Thermal Treatment on Chemical Structure of Hornbeam (Carpinus betulus L) Wood", The 6th Asia-Pacific Drying Conference (ADC2009), pp.712-719, October 19-21, 2009, Bangkok, Thailand.

B16. Istek, A., Aydemir, D., Gündüz, G. "The Effect of Thermal Treatment on Some Physical and Mechanical Properties of Wood Based Composite", Cost E49: Process and Performance of Wood Based Panels, 28-29 April 2009, İstanbul, Turkey.

B17. Erol Kırdar, Halil Barış Özel, Surhay Allahverdi, Murat Ertekin, Gökhan Gündüz. Relationship beetwen morphological characteristics and some climatical factors in population of oriental beech juvenilities (Bartın-Kumluca Case Study). International Conference «Actual problems of bioecology », Moscow, October 26-28, p:131-137, 2010.

B18. Aydemir, D. And A. Kiziltas, DJ. Gardner and Y. Han, G. Gündüz, "Foaming of Cellulose Nanofibril - Reinforced SMA Composites", 2011 TAPPI International Conference on Nanotechnology for Renewable Materials, June 6-8 Washington DC, USA, 2011.

B19. Aydemir D. and Gündüz G., Wood Polymer Nanocomposites: Processing, Manufacturing and Applications, Materials of International Scientific Conference “Advances and Perspective Development of Biotechnology”, October 3-5, 2012, N. P. Ogarev State University, Biological Faculty, Saransk, Russia.

B20. Eser SÖZEN, Gökhan GÜNDÜZ. Determination of ballistic properties of plywood supported by waste polypropylene and woven glass fiber. II. International Defence Industry Symposium, 6-8 April 2017, Kırıkkale / TURKEY.

B21. Deniz AYDEMİR, Gökhan GÜNDÜZ, Bülent KAYGIN, Gülyaz AL (2017). The Effects of Nanoclays and Cellulose Nanofibrils on the Thermal Properties of Poliamide 6.6. 4th International Furniture and Decoration Congress, 19-21 October 2017, Düzce, TURKEY.

B22. Eser SÖZEN, Deniz AYDEMİR, Gökhan GÜNDÜZ. The Effects of Nano TiO2 and Nano Boron Nitride (BN) on the Mechanical Properties of Wood Polymer Composites. 4th International Furniture and Decoration Congress, 19-21 October 2017, Düzce, TURKEY.

B23. Mizgin ALSAN, Deniz AYDEMİR, Gökhan GÜNDÜZ, Eser SÖZEN. The effects of particle size on the mechanical and morphologic properties of heat-treated wood polypropylene composites. 13th International IUFRO Wood Drying Conference, 13-15 September 2017, İstanbul, TURKEY.

C. Peer Reviewed other Publications

C1. Kasumov, N. A., Z. I. Abbasova ve G. Gündüz, “Effects of Salt Stress of the Respiratory Components of Some Plants”, Turkish Journal of Botany, 22, 389-396, (1998).

C2. Gündüz, G. “Mapping of Climate Index on Wood Preservation: Case of Turkey”, Zonguldak Karaelmas University Journal of Forestry Faculty, 9 (11), 26-33, (2007).

C3. Gündüz, G. ve Z. A. Yılmaz, “The Technological Properties of Particleboards Manufactured in 16 Different Plants in Turkey”, Zonguldak Karaelmas University Journal of Forestry Faculty, 7 (8), 49-57, (2005).

C4. Gündüz, G. ve Y. Masraf, “The Effects of Production Process Changes on Physical and Mechanical Properties of Three Layered Particleboards”, Zonguldak Karaelmas University Journal of Forestry Faculty, 7 (8), 58-71, (2005).

C5. Allahverdiyev, S., Konichev, A., Kirdar, E., Gündüz, G., Atik, A., Gadimov, A., Zeynalova, E. Application of a microbiological preparation « Baikal ЭМ1 » in conditions of Turkish Republic and the Azerbaijan Republic. Magazine « Hope of a planet », Kharkov, Russia, 2006, №12, 6-8.

C6. Popov, A., Konichev A., Tsvetkov I., Allahverdiev S., Kirdar E., Gündüz,G., Atik, А. Elaboration the test-system for diagnostics a cancer of a chestnut method. Magazine « Bulletin МSRU », Natural Sciences, Russia, 2007, №1, 7 - 11.

C7. Allahverdiyev, S., Koniçev, A., Kırdar, E., Gündüz, G., Atik, A., Dönmez, Ş., Gadimov, A., Zeynalova, E. The Usage of Microbiologic «Baykal EM1» in Turkey and Azerbaijan. Biyopreparatlar: Tarım, Ekoloji, Uygulama. Moskova, 2008, 85-87.

C8. Aydemir, D. ve G. Gündüz, “The Effect of Heat Treatment on Physical, Chemical, Mechanical and Biological Properties of Wood, Journal of Bartin Faculty of Forestry, 11 (15), 71-81, 2009.

C9. Özden, S Gündüz, G. ve Onat, S. M. “The Construction of Bows and Trees Used for Bow Construction in Turkey, Journal of Forestry, 5 (1), ISSN 1306-2182, pp:150-149, 2009.

C10. Gündüz, G. ve N. Yıldırım, G. Şirin ve S. M. Onat, “Some Anatomical, Chemical, Physical And Mechanic Properties of White Mulberry (Morus alba L.) Tree, Journal of Forestry, (5) 1, ISSN 1306-2182, pp:131-148, 2009.

C11. Gündüz, G. Özden, S. and M.S. Tekçe, “Turkish Wooden Arrow Construction, Journal of Bartin Faculty of Forestry, ISSN: 1302-0943, EISSN: 1308-5875, Volume: 12, No: 17, pp:111-122, 2010.

C12. Yapıcı, F. and G. Gündüz, A. Özçifçi, E. Likos, “Prediction of Screw and Nail Withdrawal Strenght on OSB (ORIENTED STRAND BOARD) Panels with Fuzzy Classifier”, Technology, ISSN : 1302-0056 (Printed) 1308-2051(Online) Karabük University, 12(3), 167-173, (2009)

C13. Yapici, F. and G. Gündüz, A. Özçifçi, “The Effect of Some Production Factors on Thermal Conductivity of Oriented Strand Board”, Technology, ISSN : 1302-0056 (Printed) 1308-2051(Online) Karabük University, 13 (2), 65-70, (2010).

C14. Allahverdiyev S.R., Kırdar E., Gündüz G., Kadimaliyev D., Revin V., Filonenko V.,Rasulova D.A., Abbasova Z. I., Gani-Zade S.I., Zeynalova E., “Effective Microorganisms (EM) Technology in Plants”, Technology, ISSN : 1302-0056 (Printed) 1308-2051(Online) Karabük University, 14(4), 103-106, (2011).

C15. Surhay Ragimoglu ALLAHVERDIEV, Natalia Olegovna MINKOVA, Denis Viktorivich YARIGIN, Gökhan GÜNDÜZ, (2015) “The Silent Heroes: Effective Microorganisms”, Düzce University Journal of Forestry, ISSN 1306-2182, (10)2: 24-28.

C16. Gökhan Gündüz, Nejla Aşık, Deniz Aydemir, Ayşenur Kılıç. (2015). The Production and Characterization of Bacterial Cellulose, Journal of Forestry, ISSN 1306-2182, (10)2: 1-10.

C17. Gökhan Gündüz, Deniz Aydemir, Nejla Aşık, Havva Gümüş (2016) The Effect of Silicone Oil on the Production of Bacterial Cellulose, Düzce Üniversitesi Bilim ve Teknoloji Dergisi, (4) 609-616.

C18. Faruk Çetin, Gökhan Gündüz (2017) Evaluation of Research Studies of Some Wood Species in Turkey, Journal of Bartin Faculty of Forestry, ISSN: 1302-0943, 18(2) 175-193.

C19. Eser Sözen, Gökhan Gündüz, Erol İmren (2016) Composite Materials and Fibers used in Ballistic Panel and Protective Armor Production, Journal of Bartin Faculty of Forestry, ISSN: 1302-0943, 18(2) 194-204.

C20. Şenay SABANCI, Surhay ALLAHVERDİEV, Ahmet ÇABUK, Gökhan GÜNDÜZ (2017) Preparation and Characterization of Microcrystalline Cellulose and Wood Flour Added Polyhydroxybutyrate (PHB) Composites through Solvent Method, Journal of Bartin Faculty of Forestry, ISSN: 1302-0943, 19(1) 123-131

C21. Eser SÖZEN, Gökhan GÜNDÜZ, Deniz AYDEMİR, Ersin GÜNGÖR (2017) Evaluation of Biomass Use In Terms of Energy, Environment, Health and Economy, Journal of Bartin Faculty of Forestry, ISSN: 1302-0943, 19(1) 148-160.

Projects

1. The Extraction of Rhododendron ponticum L. Flowers and Determination as an Coloring Matter, Zonguldak Karaelmas University – Research Fund, Project Member, 1996.

2. The Technologic and Breeding Properties of Camiyanı Black Pine (Pinus nigra Arnold subsp. pallasiana), THE SCIENTIFIC AND TECHNOLOGICAL RESEARCH COUNCIL OF TURKEY - TÜBİTAK-TARP 1864, Project Member, 2001.

3. The Effect of Effective Microorganisms (Baykal EM-1) on Waste Water and Ligno – Cellulosic Materials, Zonguldak Karaelmas University – Research Fund, Project Member, 2004.

4. Research on Chestnut Blight Infected Trees and Breeding of Resistant Saplings in Zonguldak Region, Governate of Zonguldak and Moscow State University, Project Member, 2005.

5. New Approaches of Wood Drying Kilns, Zonguldak Karaelmas University – Research Fund, Project Leader, 2005.

6. Preperation and Characterization of Cellulose Nanofibril and Nanoclay Reinforced PVA Nanocomposites, Scientific Research Project Bartin University Fund, Project Member, 2013-2014.

7. The Effect of EM-Technology on the Production of Bacterial Cellulose, Scientific Research Project - Bartin University Fund, Project Member, 2014-2014.

8. The Determination of Wooden Pellet Properties from Different Wood Species, Scientific Research Project - Bartin University Fund, Project Leader, 2014-2014.

9. The Production and Characterization of Bacterial Cellulose, 2209 THE SCIENTIFIC AND TECHNOLOGICAL RESEARCH COUNCIL OF TURKEY Project, Project Consultant, 2014-2014.

10. Determining of some properties of nano particles filled PLA and PHB biocomposites, Scientific Research Project - Bartin University Fund, Project Member, 2014-2016.

11. Preparation and Characterization of Microcrystalline Cellulose and Wood Flour Added Polyhydroxybutyrate (PHB) Composites through Solvent Method, Scientific Research Project - Bartin University Fund, Project Leader, 05/12/2014-05/12/2015.

12. The Balistic Properties of PP/GF Reinforced Wooden Composites, Scientific Research Project - Bartin University Fund, Project Leader, 19/07/2017-19/08/2018.

B. Sc. Degree

- Wood Material Technology I. , Furniture Decoration

- Wood Material Technology II. , Furniture Decoration

- Woodworking Machinery , Furniture Decoration

- Mass Production Techniques , Furniture Decoration

- Wood Physics , Forest Industrial Engineering

- Drying Technology , Forest Industrial Engineering

- Exotic Trees , Forest Industrial Engineering

- Timber Industry , Forest Industrial Engineering

M. Sc. Degree

- New Developments in Wood Technology

- Modern Wood Drying Techniques

- Physical and Mechanical Test Methods and Application on Wooden Materials

- Biomaterials and Biomimetics

Ph. D. Degree

- Wood Formation

- Important Foreign Trees for Trade

Other Courses Taught

- Decision Making Techniques , Bartın Police Department - 2008

- Leadership , Bartın Police Department - 2008

- Human Rights , Bartın Police Department - 2008

Master's Degree

1. Yılmaz, Z.A, “The comparision of some pysical and mechanical properties of particleboards manufactured in 16 different plants in Turkey”, Zonguldak Karaelmas University, 2004.

2. Masraf, Y. “The effects of the physically and mechanically specialities in boards when the production's contiditions change, on the production of the particle board that three layer with lying particle”, Zonguldak Karaelmas University, 2005.

3. Aytin, A., “Current status of forest products industry, problems and suggests in duzce province”, Zonguldak Karaelmas University, 2006.

4. Oral, M.A., “Investigation on some anatomical and physical properties in disaes and notdisaes wood of Anatolian chestnut (Castanea sativa mill. )”, Zonguldak Karaelmas University, 2006.

5. Şirin, G., “Some anatomical and chemical properties of white mulberry (Morus alba L. ) tree”, Zonguldak Karaelmas University, 2006.

6. Yıldırım, N., “Some mechanic and physical properties of white mulberry (Morus alba L. ) trees”, Zonguldak Karaelmas University, 2006.

7. Aydemir, D., “The effect of heat treatment on some physical, mechanic and technological properties of Uludağ fir (Abies bornmülleriana mattf.) and hornbeam (Carpinus betulus L.) woods”, Zonguldak Karaelmas University, 2007.

8. Akgün, K., “The effect of heat treatment and tannens on some mechanic and physical properties of laminated chestnut (Castanea sativa Mill.) wood”, Zonguldak Karaelmas University, 2008.

9. Karakaş, G., “The effect of heat treatment on some physical and mechanic properties of wild pear (Pyrus elaeagnifolia Pall.) woods”, Zonguldak Karaelmas University, 2008.

10. Sancak, M., “The assessment of general technical characteristics of monoblock filled doors used in indoors”, Zonguldak Karaelmas University, 2008.

11. Özden, S., 2011. The effects of the traditional Turkish arrows’s shape and surface roughness to the arrows speed manufactured from the scotch pine (Pinus sylvestris L.), Bartın University.

12. Çelik, B., 2011. Feasibility study of a pellet plant: Bartin sample, Bartın University.

13. Aşık, N., 2016. The production and characterization of bacterial cellulose with different nutrient source and surface–volume ratios, Bartin University.

PhD

1. Yapıcı, F., 2008. The effect of some production factors on the properties of OSB made from scotch pine (Pinus sylvestris L.) wood, Zonguldak Karaelmas University.

2. Özkan, C., 2011. Preparation of a new combustion mechanism and determine combustion properties heat treatment of wood materials, Bartin University.

3. Aydemir, D., 2012. Characterization and foaming of cellulosic nano/macro filler reinforced styrene maleic anhydride (SMA) composites, Bartin University.

4. Süheyla Esin Köksal, 2016. Researching on hydraulic conductance of different stem parts of fir (Abies bornmulleriana mattf.), Bartin University.

5. Sözen, E., 2019. Determination of the ballistic, accelerated uv aging and thermal conductivity properties of osb panels supported by waste polypropylene and woven glass fiber, Bartin University.